Outdoor Services Crew

Saturday, August 27, 2011

Early Mornings

Being in the Turf Management field means being up early and out checking on things as the sun is coming up on a new day.  The week before the students move in is always one of the quietest times of the year.  Summer school has finished, many, if not all, of the large scale construction projects have finished and it is the final week for the grounds crew to be able to operate with little to no interference.  It is also a time when, just like graduation, we are working very hard to spruce the campus up for the large influx of new students and family.  Our fertilization is peaking at this time, irrigation practices are fine-tuned and mowing happens on a daily basis.
But there is just something about being on campus early, the sun is shining through the trees, there are hardly any people, traffic or anything other than a peaceful landscape.

I thought sharing a few shots of campus in the early morning light would be worthwhile.

Ryan



Friday, August 26, 2011

The Compost Tea Effect

For the past couple of months we have made and injected our compost tea.  Of course it will be years to start to get the full effect of the bacterial injection, but one thing we have noticed right away is something we call the compost tea effect.  If you have ever switched from normal diesel fuel to biodiesel then you may have heard of the biodiesel effect. When you switch over to biodiesel after using regular diesel, you have to change out the fuel filter frequently because the biodiesel frees up deposits in the fuel system that clog up the fuel filter. In time these deposit are flushed out and you can usually return to normal frequency on your fuel filter changes.
What you see above is organic debris that started to clog our nozzles a couple of days after the first injection.
Since we could not find anyone else who has injected the compost tea on this scale, we had not been warned of such a problem.  All of our heads worked properly and these nozzles were in the ground for years with the occasional clogged screen here and there.  What you see above are Hunter MP-Rotators, the 1000 and 2000 size head.  They are basically miniature rotors the retrofit into existing pop-up spray heads and have screen sizes to match each level, 1000 having the finest mesh size, 2000 having a slightly bigger size and 3000 having the biggest mesh size.  We initially didn't put two and two together until we started to actually find complete irrigation zones where these MP 1000/2000 nozzles were all clogged solid.  The only time you may see this naturally is if you just had a large irrigation break and large amounts of debris were put into the system.  That had not been the case in all of these location.

We worked pretty hard to make the repairs we needed, which actually turned out to entail replacing about 750 of these nozzles all throughout campus.  Then after some conversation and brainstorming we realized that the clogging happened just after our first inject of tea. We were not positive since we did not inspect every station prior to the injection, but the amount of clogged heads would have been noticed in advance of the first injection, so we theorized the tea caused it somehow.  So prior to the next injection we went to the majority of our MP 1000/2000 zones and inspected them to see if they were in good shape as a baseline.

At the same time we had another theory going.  Since almost none of our MP-3000 zones clogged we thought that the screen size of the 3000 series head must have been just large enough to allow this organic debris to flow through and out of the head.  We purchased a few 3000 screens and placed them on the 1000/2000 series heads.  Of course we were not very confident because there must be an engineering reason for the screen sizes based on the small gears inside the head, but it was worth a try.

We went forward with our next injection after establishing our baselines prior and we were able to confirm that the compost tea injection was somehow freeing up this organic matter and allowing it to flow down the system.  I believe that the tea product itself is not at a concentration high enough for it to be the clogging agent, but instead the bacteria in the tea eats away at organic material on the inside of the pipes.  Irrigation mainlines are really no different than rivers or streams in that there are dead spots and locations where water swirls and stays in place as water passes by.  After the injection there were about 12 hours until I ran another cycle the next night to "flush" the system out.  I believe during that time is when the majority of the organic matter is freed and travels through the system.

Once I had a good feeling and understanding of what was going on I spoke with our compost tea guru. He initially believed it could be a real possibility but then he spoke with a bunch of his colleagues and they all believe that what I'm describing is a result of the bacteria eating away at the organic matter lining the irrigaiton pipes.

We have done three injections now and every time, like clockwork, we are getting this result, each time with less and less clogged heads.  We are changing out many of the screens to the MP-3000 screens which has helped tremendously with this organic clogging.  We believe losing a few heads to true debris is acceptable while allowing this organic matter to flush through.

After all the work we have done building, testing and now injecting, we think we have found all the pitfalls and have started to make adjustments to account for them.  I still believe we made the right decision to inject this product and although there have been headaches, it has and is still very rewarding to do something in a way nobody else has.

Ryan